DIMENSIONS: 4.5" x 16"
FENDER SIZING GUIDE
Recommended size for fenders by Boat Length:
Boats up to 10 ft: 4.5" x 16" Twin/Single Eye
Boats from 10-30 ft: 6.5" x 23" Twin Eye
Boats from 15-40 ft: 8.5" x 27" Twin Eye
Boats from 20-30 ft: 6.0" x 15" Center Hole
Boats from 30-40 ft: 8.0" x 20" Center Hole
Boats from 40-50 ft: 10" x 28" Center Hole
Consider using a larger size fender if mooring in high winds, rough water, or unprotected moorings. Many factors should be considered when determining what size fender to use. If in doubt, seek professional advice.
FENDER INFLATION GUIDE
Fill fender until sidewalls are firm, but not bulging. Fender should still compress 1/2" under light pressure. When inflating with an air compressor, set the PSI to 2 lbs. Moisten inflation needle prior to inserting into the fender. Pressure at 20 degrees C.
Important! Do not over-inflate as this will weaken the product and reduce its lifetime
All trademarks remain property of their respective holders, and are used only to directly describe the products being provided. Their use in no way indicates any relationship between us and the holders of said trademarks.
The product being sold in this listing is not DOT approved unless otherwise stated. All goods sold are not DOT approved, they are for off road use only. Laws concerning this product vary from state/province to state/province. Your state/province may prohibit its use on public roads or restrict its use to novelty, show use, off-road areas, or race facility areas only. In some states/provinces off-road uses are also prohibited. The manufacturer and retailer assume no responsibility for any use or application of this product in violation of any applicable law. Before installing this product, please check your state/provincial and local/municipal laws and regulations.